Binder的材料测试室已经在德国克雷菲尔德的UL International的热塑性测试中心提供可靠的服务已有很多年了。
经过认证的测试中心使用时钟上的粘合剂单元（图1）。它提供复合，并提供测试标本制造和测试以及创新塑料的认证。已经在标准和高级塑料上进行了200多个测试程序，以用于各种应用。该中心使用全自动注塑机，以产生100种不同的测试样品形式，如校园，UL，ASTM和ISO在内的标准中所述。
.jpg)
图1。全天候测试
The Requirements
Binder与UL TTC员工密切合作，定制了FP 115 -S测试室，以满足测试中心对其客户的要求。它简化了空气变化速率和温度的校准，从而提高了精度。以下是要满足的测试要求：
- Validation and accreditation of advanced plastics (Figure 2)
- Compound testing in reference to continuance and feature
- Accurate temperature inside the test chamber adhering to a set high air exchange rate
- High reliability around the clock
- Storage time as high as 7,000 hours
- Test specifications according to the standards, including CAMPUS, UL, ASTM, and ISO
- 方便使用的
- 清晰的测试结果文档
.jpg)
图2。创新塑料的测试
BINDER’s Bespoke Solution
BINDER implemented a unique concept to measure the air change rate to meet these test requirements. The test center successfully addressed these requirements with the help of BINDER’s APT.line™ technology. The combination of APT.line™ technology and mechanical convection enables rapid heat-up and short drying times, facilitating the accurate testing of materials such as high-performance thermoplastics and polyolefins in a qualified manner.
The units typically run around the clock at the test center, requiring material storage for extended periods of up to 7,000 hours. Cost will be increased exponentially in the event of test failures due to the lengthy storage times. Hence, UL TTC demanded high quality, reliable equipment. BINDER provided the following solutions with its FP 115-S test chamber:
- Material test chamber with forced convection FP 115-S
- 适应性高空汇率
- 均质温度条件
- Simplified calibration technology that improves accuracy of temperature and air exchange rate
- Digital documentation of temperature, unit status (ON/OFF) and error messages
- 提供不间断服务的材料测试室
- 方便使用的
The user-friendly material test chamber makes the application simpler for users. Digital temperature settings and an integrated weekly program timer enables data to be collected automatically for temperature, provide unit status, and documents error messages. All relevant data is digitally documented at the testing center. Moreover, the ability to continuously monitor several units from workstations allows the testing center staffs to assess the test procedures and respond rapidly in case of emergency. Figures 3 shows the material test chamber FP 53.
.jpg)
图3。Material test chamber FP 53
Advantages and Applications of BINDER’s Material Test Chambers
The following are the advantages of BINDER’s material test chambers:
- Specialist for challenging heating profiles
- 可变的高空汇率
- “Made in Germany” quality
以下是粘合剂材料测试室的应用领域：
- 地表工业
- Metal industry
- Plastics industry
- 电子/半导体行业
Conclusion
除了高度精确外，所有粘合剂材料测试室还具有广泛的温度范围和广泛的编程选项，例如量身定制的过程，配置文件和坡道。
此信息已从Binder GmbH提供的材料中采购，审查和改编。亚博网站下载
For more information on this source, please visit活页夹GmbH。